Fluke 323 vs 324 vs 325 – Clamp Meter Comparison Guide 2022
A clamp meter is a special type of electrical measuring device that is used to measure the current flowing through a conductor. Clamp meters can measure voltage, current, resistance, capacitance, conductance, inductance, temperature, and, in some cases, duty cycle, decibels, and frequencies. Clamp meters are perfect for troubleshooting electrical problems because they can quickly and easily measure a variety of parameters. It is similar to other types of measuring equipment, such as multimeters, but it has an inbuilt clamp that is used to grip the conductor. This allows the current to be measured without having to make physical contact with the wire.
Clamp meters are commonly used by electricians, who need to be able to quickly and easily measure current levels. Clamp meters are available in digital and analog versions and are typically more accurate than standard meters.
When it comes to clamp meters, Fluke offers three similar clamp meters with largely comparable features, but there are a few important differences that you should know about. In this article, we’ll compare Fluke 323 VS 324 VS 325, and see which one is best for you.
At a Glance:
The main difference between Fluke 323 and 324, 325 are quickly stated below;
9.3
- Current measurement up to 400 amperes on AC.
- Voltage measurement up to 600V AC and DC.
- True RMS: Accurate measurements on non-linear signals
- Resistance measurement up to 4 kΩ with continuous detection
- Safety Rating CAT IV 300V and CAT III 600 V
- Measurement of continuity is less than or equal to 70 Ω.
9.7
- Temperature measurement, -10.0°C to 400.0°C.
- Current measurement up to 400 amperes on AC.
- Voltage measurement up to 600V AC and DC.
- True RMS: Accurate measurements on non-linear signals
- Safety Rating CAT IV 300V and CAT III 600 V
- The hold button ensures that measurements are not lost
9.8
- Current measurement upto 400 amperes on both AC and DC.
- Voltage measurement upto 600V on both AC and DC.
- Temperature measurement, -10.0°C to 400.0°C.
- Resistance measurement upto 40.00kΩ with continuous detection.
- Safety Rating CAT IV 300V and CAT III 600 V.
- True RMS: Accurate measurements on non-linear loads.
1. Fluke 323 True-RMS Clamp Meter:
The Fluke 323 clamp meter is a small and lightweight meter that is perfect for measuring current. It has a ton of features, such as current 400 Ampere AC, 600V AC & DC voltage measurement, and True RMS AC voltage and current for accurate measurement on non-linear loads This meter is CAT IV 300V/CAT III 600 V safety rating, making it a reliable choice for professional use. Additionally, its resistance measurement of up to 4 kΩ with continuity detection ensures accurate measurements every time.
The Fluke 323 clamp meter is the perfect tool for general and simple troubleshooting. It has true RMS measurements, making it ideal for measuring currents in coiled wire sections up to 400A. With its easy-to-use design, the Fluke 323 clamp meter is a great choice for anyone looking for an affordable and reliable tool.
The Fluke 323 also has a backlight for easy viewing in low light conditions, it is designed to detect AC, voltages, switches, fuses, load currents, contacts, and continuity. With its large display screen and easy-to-use buttons and an ergonomic design that makes it easy to use. The Fluke 323 True-RMS Clamp Meter is a great tool to have on hand. It is easy to use, even with thick gloves.
Learn more: Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit Review
Key Features of the Fluke 323 Multimeter:
- Current measurement up to 400 amperes on AC.
- Voltage measurement up to 600V AC and DC.
- True RMS: Accurate measurements on non-linear signals
- Resistance measurement up to 4 kΩ with continuous detection
- The design is slim and ergonomic.
- Measurement of continuity is less than or equal to 70 Ω.
- Safety Rating CAT IV 300V and CAT III 600 V
2. Fluke 324 True-RMS Clamp Meter:
The Fluke 324 True RMS Clamp Meter is the perfect tool for troubleshooting electrical problems in both commercial and domestic settings. True RMS feature can accurately measure voltage and current on nonlinear loads, making it ideal True RMS measurement technology ensures accurate readings, while its slim, ergonomic design makes it easy to handle. Additionally, the Fluke 324 clamp meter comes with a host of other features that make it an essential tool for any electrician’s arsenal, such as a backlight for low-light conditions and a continuity tester.
Fluke 324 meter is a compact and durable clamp meter that is ideal for measuring AC currents up to 400A in existing wire sections. This meter also measures temperature range of -10.0°C to 400.0°C (14.0°F to 752.0°F), making it a versatile tool for a variety of electrical applications. With its True RMS detection, the Fluke 324 clamp meter can accurately measure voltage and current fluctuations, making it an essential tool for professionals and DIYers. This device includes a carrying case as well as a hold function for capturing displays.
Key Features of the Fluke 324 Multimeter:
- Current measurement up to 400 amperes on AC.
- Voltage measurement up to 600V AC and DC.
- Temperature measurement, -10.0°C to 400.0°C (14.0°F to 752.0°F)
- True RMS: Accurate measurements on non-linear signals
- Resistance measurement up to 4 kΩ with continuous detection
- The design is slim and ergonomic.
- Measurement of continuity is less than or equal to 30 Ω.
- Safety Rating CAT IV 300V and CAT III 600 V
- The hold button ensures that measurements are not lost even if the meter is accidentally turned off.
3. Fluke 325 Clamp Multimeter AC-DC TRMS:
The Fluke 325 Clamp Multimeter AC-DC TRMS is a reliable, versatile troubleshooting tool for commercial and residential electricians. This true-RMS meter quickly finds electrical problems in wiring, outlets, circuit breakers, diagnosing motors, transformers, and other equipment. With its CAT III 600 V safety rating, the Fluke 325 is perfect for use in tough environments. its slim design makes it easy to carry and use in tight spaces. This meter can measure DC current, DC voltage, temperature, frequency, and more. The clamp design makes it easy to take measurements without having to come into contact with the wiring.
Fluke 325 clamp meter frequency range of 5 Hz to 500 Hz, it can measure even the most difficult signals. Additionally, the temperature range of -10°C to 400°C (14°F to 752°F) means that it can be used in a wide variety of applications. The AC/DC current range of 0 to 40.00 A /400.
Key Features of the Fluke 325 Multimeter:
- Current measurement up to 400 amperes on both AC and DC.
- Voltage measurement up to 600V on both AC and DC.
- Temperature measurement, -10.0°C to 400.0°C.
- True RMS: Accurate measurements on non-linear loads.
- Resistance measurement up to 40.00kΩ with continuous detection.
- The design is slim and ergonomic.
- Measurement of continuity is less than or equal to 30 Ω.
- Safety Rating CAT IV 300V and CAT III 600 V.
Frequently Asked Questions:
A clamp meter is a type of multimeter that allows users to measure current more quickly than traditional multimeters. Clamp meters feature a clamp-on sensor that makes it easy to get an accurate reading without having to make physical contact with the object or wire you’re measuring. Unlike a multimeter, which requires you to insert the probes into the circuit, a clamp meter simply clamps around the wire. This makes it much faster and easier to get an accurate reading.
A Fluke meter is an investment in quality and precision, with a Fluke meter, you know you’re getting a tool that has been rigorously tested and calibrated to ensure accuracy. Whether you’re a professional or just need occasional readings, a Fluke meter is the right choice for you.
A true-RMS multimeter is the only type that can accurately measure both sinusoidal and non-sinusoidal signals. This makes them ideal for use in a wide variety of settings, from home repairs to professional engineering projects. True-RMS meters are more expensive than standard multimeters, but the added accuracy and versatility make them worth the investment.
A clamp meter is a tool used to measure the electrical current in a circuit. It is better than a multimeter for measuring current because it can get closer to the conductor. A multimeter is good for measuring voltage, resistance, and frequency, but they are not as efficient at measuring current as clamp meters. Clamp meters have a built-in current transformer that makes it easy to take accurate measurements of AC or DC current without having to contact the conductor.
Final Note:
The Fluke 323 clamp meter is a perfect choice if you need a simple product, accurate True RMS measurements. The Fluke 324 clamp meter is the perfect tool for technicians and electricians who need to take quick, accurate measurements of current and voltage. With its large display and easy-to-use interface, you’ll be able to get the information you need quickly and easily. so, it can handle even the most challenging jobs. The Fluke 325 clamp meter is the perfect tool for professional electricians and serious hobbyists. It has a wide range of readings, including DC currents, frequencies, and higher resistance. it’s easy to use and comfortable to grip. The final selection will be based on your needs and requirements.
